On watchIndependent · Reader funded · No paywall
Local · 21:50

How to Clean Grease Traps and Dumpster Pads with High Pressure

By @andyirvo412

If you run a restaurant, pub, café, takeaway, or commercial kitchen in Geelong, you already know that grease and food waste build up fast. Grease traps and dumpster pads are two of the dirtiest, smelliest, and most overlooked parts of any food business. They are also two of the areas most likely to attract pests, cause odours, and draw the attention of inspectors. High-pressure cleaning, done properly, is one of the most effective ways to keep both areas under control.

This guide explains how high-pressure cleaning works for grease traps and dumpster pads, what equipment and methods are involved, what the rules look like in Victoria in 2026, and when it makes sense to call a professional.

Why Grease Traps and Dumpster Pads Need Regular Attention

A grease trap (also called a grease arrestor or grease interceptor) captures fats, oils, and grease (FOG) before they enter the sewer system. Left unchecked, FOG solidifies in pipes and contributes to blockages and sewer overflows. Dumpster pads, meanwhile, collect leaking bin liquids, food scraps, and oily residue that soak into concrete and create stubborn stains and odours.

In Geelong, businesses that discharge trade waste to the sewer generally operate under an agreement with Barwon Water, which sets out requirements for pre-treatment equipment such as grease traps. Keeping these areas clean is not just about appearances. It is part of meeting your trade waste obligations and your food safety responsibilities under local council requirements.

Understanding the Difference Between Grease Trap Cleaning and Pad Cleaning

Grease Trap Cleaning

Grease trap servicing is two jobs in one. The first is waste removal: the contents of the trap (floating grease, water, and settled solids) must be pumped out by a licensed liquid waste transporter. The second is cleaning the trap itself, including walls, baffles, lids, and surrounding surfaces. High-pressure water is used for the second part, after the trap has been emptied.

Important: pressure washing alone does not replace pumping out. Washing grease off the trap walls and flushing it down the drain simply moves the problem into the sewer, which breaches trade waste rules and can result in penalties.

Dumpster Pad Cleaning

Dumpster pads are the concrete or paved areas where bins sit. These surfaces absorb grease and organic matter, so they need a combination of heat, detergent, and pressure to clean properly. The key difference is that wash water must be managed carefully so it does not run into stormwater drains.

Equipment Used for High-Pressure Grease Cleaning

Cold water pressure washers can remove loose dirt, but grease needs heat to break down. Professional crews typically use:

  • Hot water pressure washers: Water heated to around 80 to 95°C melts and emulsifies grease far more effectively than cold water.
  • Surface cleaners: Rotating attachments that clean large flat areas like dumpster pads evenly and reduce streaking.
  • Degreasing detergents: Alkaline or biodegradable degreasers that loosen oils before rinsing.
  • Wet vacuum recovery systems: Units that collect wash water so it can be disposed of correctly.
  • Drain mats and bunding: Barriers that block stormwater drains during cleaning.
  • Personal protective equipment: Gloves, eye protection, waterproof clothing, and non-slip boots.

A typical pressure range for concrete pads is 2,500 to 3,500 PSI, while grease trap interiors are usually cleaned at lower pressure to avoid damaging baffles, seals, and fittings.

Step-by-Step: Cleaning a Dumpster Pad with High Pressure

Here is the general process professionals follow to clean a commercial bin area safely and effectively:

  1. Clear the area. Move bins out of the way and sweep up loose rubbish, glass, and food scraps.
  2. Protect drains. Cover or block stormwater pits and gullies using drain covers or sandbags so contaminated water cannot escape.
  3. Apply degreaser. Spray a suitable detergent over oily patches and let it dwell for 5 to 15 minutes. Do not let it dry on the surface.
  4. Agitate stubborn spots. Use a stiff brush on heavily stained areas to help the detergent work.
  5. Pressure wash with hot water. Work in overlapping passes from the highest point to the lowest, using a surface cleaner for large sections and a wand for edges and corners.
  6. Recover the wash water. Use a vacuum system to collect runoff and direct it to an approved disposal point, typically the sewer under trade waste conditions.
  7. Rinse and inspect. Do a final rinse, check for remaining stains, and repeat on problem areas if needed.
  8. Clean the bins. Wash the bins themselves, or arrange a bin-cleaning service, so the pad is not recontaminated.

How High-Pressure Cleaning Fits into Grease Trap Maintenance

When a grease trap is serviced, the process usually looks like this: the trap is pumped out completely by a licensed waste operator, the interior is scraped and washed with controlled pressure, baffles and outlet pipes are checked, and the lid and surrounding floor area are degreased. Wash water from inside the trap is removed with the waste rather than flushed away.

How Often Should Grease Traps Be Cleaned?

Frequency depends on trap size, kitchen volume, and the type of food you cook. As a general guide:

  • Busy restaurants and takeaways often need servicing every 4 to 8 weeks.
  • Lower-volume cafés may manage every 8 to 12 weeks.
  • Many authorities use the “25 percent rule”: the trap should be cleaned when FOG and solids make up 25 percent of its liquid depth.

Check your trade waste agreement, as it may specify https://pressurecleaninggeelong.com.au/roof-cleaning/ a minimum cleaning frequency. Keep service records on site, because inspectors may ask to see them.

Environmental and Regulatory Considerations in Geelong

Victorian environment protection laws, administered by the EPA, place a general duty on businesses to minimise the risk of harm from pollution. Wash water containing grease, detergents, and food waste must never enter the stormwater system, which flows untreated to local waterways, including Corio Bay and the Barwon River. Even small amounts of contaminated runoff can harm aquatic life.

In 2026, expectations around waste management and environmental compliance continue to tighten, and many councils and water authorities are paying closer attention to commercial wash-down practices. Businesses are encouraged to:

  • Keep a copy of their trade waste agreement and grease trap service records.
  • Use licensed liquid waste contractors for pump-outs and obtain waste transport receipts.
  • Choose biodegradable, low-phosphate cleaning products where possible.
  • Avoid washing bin areas into stormwater drains under any circumstances.

If you are unsure what your site’s obligations are, contact Barwon Water or the City of Greater Geelong for guidance before starting a cleaning program.

Safety Tips for High-Pressure Cleaning

High-pressure equipment and grease traps both carry real hazards. Hot water can cause serious burns, and a pressure jet can cut skin or throw debris. Grease traps are also considered confined or hazardous spaces, as they can contain toxic gases such as hydrogen sulphide.

  • Never put your head or body into a grease trap pit. Leave interior work to trained operators.
  • Keep wet floors from becoming slip hazards by using anti-slip mats and warning signs.
  • Never point a pressure wand at people, pets, or electrical equipment.
  • Wear suitable PPE at all times, including eye and hand protection.
  • Do not mix cleaning chemicals, as some combinations release harmful fumes.

Keeping Your Pads and Traps Cleaner for Longer

Good daily habits reduce how often heavy cleaning is needed and lower your overall costs:

  • Scrape plates and pans into the bin before washing, rather than rinsing food into the sink.
  • Use sink strainers and empty them regularly.
  • Collect used cooking oil in a sealed container for recycling instead of pouring it down the drain.
  • Use bin liners and keep bin lids closed to limit leakage and pests.
  • Fix leaking bins promptly and replace damaged ones.
  • Consider a bunded or roofed bin enclosure with a connection to sewer, which keeps rain from spreading contaminants.

DIY vs. Hiring a Professional in Geelong

For light maintenance, such as sweeping a pad or spot-cleaning small stains, in-house staff can often handle the job. However, deep cleaning and anything involving a grease trap is usually best left to professionals. A commercial cleaning contractor brings hot water equipment, wastewater recovery systems, and the know-how to protect drains and meet compliance requirements. A licensed liquid waste operator is required to remove and transport grease trap waste.

When choosing a provider, ask about:

  • Whether they use hot water pressure cleaning and wastewater recovery
  • Their licensing and insurance
  • How they dispose of waste and whether you will receive documentation
  • Flexible scheduling, such as early morning or after-hours service that avoids disrupting trade
  • Options for regular maintenance plans

Final Thoughts

Clean grease traps and dumpster pads protect your business from odours, pests, blocked drains, and compliance headaches, and they protect Geelong’s waterways too. The most effective approach combines hot water high-pressure cleaning, proper wastewater capture, licensed waste removal, and good daily kitchen habits. Whether you handle routine upkeep yourself or bring in a local specialist, setting up a regular schedule will keep your site cleaner, safer, and ready for inspection throughout 2026 and into 2027 and beyond.

Geelong Pressure Cleaning Pros

(03) 8657 4277

Corrections

Spot something wrong? Send it to the desk and it gets fixed in the open.